3DX-final.pdf

This file is a one page pdf file.  Take it to Kinko's or some other printing store.  It is formatted for an A0 sheet of paper (33 1/8"x46 1/4").  Print one test sheet first.  Check the inch scale in the bottom R. corner of the plans with a ruler.  Every printer has slightly different ways they treat the same file, so variations can occur.  This check will ensure you are getting the right printed size.  If it is within 1/16" than you are good to go.  If not, slightly resize the image to get the correct size.  The border around the plans is exactly 28H"x40W".

3DX-final-36.pdf is formatted for 36" wide paper.  Some Kinko's do not have the A0 sheets.  This pdf should work on the 36" wide sheet fed printer.

Just make sure that "fit to page" or "center and fit" is NOT checked in the Adobe printer dialouge box when printing.  Be sure to tell the clerk at Kinko's or you may end up with a funky sized printout...

Have fun, and if you have any questions, feel free to email me at tim@jetworksmodels.com

Cheers,

Tim Hart